As any seasoned rider knows, our hands take a beating while riding – whether from the wind, rain, sun exposure or even impacts in a crash.
So, finding gloves that check all the boxes can be a tough task. That’s why when I had the chance to test them out, I was interested in learning more.
Could these short-cuff riding gloves provide enough wet-weather protection while still ensuring top-notch feel and flexibility? But, the main question I will answer in this review will be: Are these the best waterproof motorcycle gloves for you?
I decided to take a closer look to find out.
REV’IT! Boxxer 2 H2O Gloves
Key Takeaways
- Minimal cold insulation
- Weatherproof riding gloves
- Lacks touchscreen fingertips
REV’IT! Boxxer 2 H2O Gloves – The Bottom Line
The Revit Boxer 2 H2O gloves hit a very specific sweet spot in providing lightweight weather protection gloves with a fantastic feel.
While I’m sad to see the touchscreen tips removed, they still deliver excellent flexibility and ventilation properties well suited to multi-season riding in wet regions.
For daily commuting or summer touring duties, the Boxer 2 gloves tick all the boxes. Just don’t expect them to keep their hands toasty when the mercury dips below 50 degrees!
Comparison With Other Waterproof Motorcycle Gloves
| Product Name | Key Features |
|---|---|
| Reax Ridge WP Gloves | – Waterproof and windproof Hipora liner- Premium kangaroo leather construction- Knuckle armor for impact protection |
| Alpinestars SMX-Z Drystar Gloves | – Drystar waterproof, breathable membrane- Kangaroo leather/fabric shell materials- TPU slider palms for abrasion resistance |
| Revit Sand 4 H2O Gloves | – Hydratex membrane for waterproofing- Premium cowhide leather outer construction – Thermal insulation for warmth |
The Revit Sand 4 H2O gloves stand out for their thermal insulating properties, making them suitable for cold-weather riding.
The waterproof Hydratex liner also gives excellent precipitation protection. However, the Reax Ridge WP gloves offer more comprehensive armor coverage with TPU protectors, while the Alpinestars SMX-Z prioritizes abrasion and tear resistance with kangaroo leather palms reinforced with TPU sliders.
So, depending on your priorities – warmth, impact absorption, or abrasion protection – each glove model caters towards specific needs.
How Do the Revit Boxer 2 Gloves Perform On The Road?
Over the last few months, I’ve logged over 500 miles wearing the Boxer 2 gloves in varying conditions. Here are some of my impressions:
The Good
- Supple feel right off the bat with minimal break-in
- Dexterous fine motor control is ideal for sportbike riding
- Lightweight and comfortably snug fit
- Excellent abrasion and impact protection
- Total waterproofing in wet weather
- The breathable liner prevents sweaty palms even on summer rides
The Bad
- No more touchscreen-compatible fingertips! (Whaaat?)
- Minimal insulation = not suitable for cold weather riding
- Palm seam reinforcement would bolster protective coverage
A Quick Overview of the Revit Boxer 2 Gloves
The Revit Boxer 2 H2O gloves are the second generation of the Boxer glove lineup from Revit. I was a big fan of the original Boxer gloves since they targeted a very specific need – low-profile, lightweight short cuff gloves with waterproofing.
Most winter or all-weather gloves tend to be quite bulky with extended cuffs. But the Boxer hits a nice sweet spot by cramming weather protection into a flexible, dextrous, and comfortable daily riding glove.
At first glance, the Boxer 2 gloves look almost identical to the previous model. The overall construction remains goat leather, with accordion flex panels across the fingers and wrist. You still get a TPR knuckle protector and waterproof Hydratex liner.
However, Revit seems to have foolishly removed one killer feature from the Boxer 2…the touchscreen-compatible index finger tip!
While not a dealbreaker, the touchscreen tips were mighty handy for quickly scrolling through playlists or glancing at turn-by-turn directions mid-ride.
Breaking Down the Materials and Features
The first thing I noticed when strapping on the Revit Boxer 2 gloves was the improved fit. The gloves feel snugger than before, with a more precise contour around each finger. Revit seems to have tweaked the patterning while retaining familiar high-quality materials:
Outer Shell
- Goat leather palms provide suppleness and heat resistance
- Synthetic leather paneling across the backhand for flexibility
- TPR knuckle armor for impact absorption
- Reflective accents on the backhand improve visibility
Liner
- Waterproof Hydratex membrane keeps hands dry
- Thermal membrane for maintaining warmth
- Breathable construction prevents overheating
The cuff uses a combination of flexible textile paneling with a wide hook-and-loop closure strap for securing the gloves tightly. The wrist also incorporates accordion flex zones to avoid limiting movement.
Moving to the palm, the glove incorporates Kevlar stitching and an extra layer of abrasion-resistant cowhide leather. This beefs up durability in a high-wear area while also resisting seam failure.
For cooling airflow, perforations throughout the textile paneling pair with the breathable Hydratex liner to regulate hand temperature during warmer rides or vigorous brake/clutch lever operation.
Rounding things out are several smart ergonomic details:
- A padded thumb brace stabilizes the joint against bumps and vibration
- Gel padding on the heel of the hand dampens shock
- Fingertip seams positioned to not interfere with feel and function
- A suede visor wipe on the thumb for clearing fog and grime easily
REV’IT! Men’s Glove Sizing
| SIZE | HAND CIRCUMFERENCE (IN) | HAND LENGTH (IN) |
|---|---|---|
| XS | 7.2-7.6 | 7.4-7.6 |
| SM | 7.6-8.1 | 7.6-7.8 |
| MD | 8.1-8.7 | 7.8-8 |
| LG | 8.7-9.1 | 8-8.2 |
| XL | 9.1-9.6 | 8.2-8.4 |
| 2XL | 9.6-10.2 | 8.4-8.6 |
| 3XL | 10.2-10.7 | 8.6-8.8 |
| 4XL | 10.7-11.2 | 8.8-9 |
FAQ
What is the main construction and armor of the Revit Boxer 2 gloves?
The main shell uses a combination of goat leather (on the palm) and synthetic leather paneling (on the backhand). The gloves also incorporate foam armor in the knuckles and extra cowhide leather reinforcement on the palm.
Do the Boxer 2 gloves have a waterproof liner?
Yes, the gloves use Revit’s waterproof Hydratex membrane to keep hands dry in wet conditions while allowing vaporous perspiration to escape.
What sizes are available for the Revit Boxer 2 gloves?
The Boxer 2 gloves come in sizes ranging from Small all the way up to 3XL. Refer to Revit’s sizing chart to find your ideal fit based on hand circumference measurements.
Can you operate touchscreens while wearing Boxer 2 gloves?
Unfortunately, Revit removed the conductive fingertip tech from the Boxer 2 gloves, so they are no longer touchscreen-compatible. This is one downside compared to the previous model.
And Finally…
The Revit Boxer 2 gloves deliver an impressive balance of protection, weatherproofing, ventilation, and sensitivity well suited to 3-season motorbike riding (just not freezing temps).
While I’m disappointed by the lack of touchscreen compatibility in this second-gen edition, the supple goat leather construction and armored knuckles still provide fantastic flexibility and impact absorption during daily road use.
For riders looking for a sturdy yet dextrous glove for commuting or summer tours, the Boxer 2 remains a great option to consider. Just make sure to size up if you fall between guidelines.
Have you tried the Revit Boxer 2 gloves, or are you considering a pair? Let me know your thoughts in the comments below!
Previous Article:
Next Article:
Sources: Motorcycle personal protective equipment (1)